How Can Electrical Energy from Solar Power be Profitable?
December 14, 2015 | Universidad Politécnica de MadridEstimated reading time: 2 minutes
Researchers from UPM have studied the possibilities of energy production through solar power from an innovative prospect in search of the profitability of facilities with no grants.
A team of researchers from the Universidad Politécnica de Madrid (UPM), in collaboration with the Nobel Laureate Carlos Rubbia from the Institute for Advanced Sustainability Studies (IASS, Potsdam, Germany) and the King Abdulaziz University of Arabia Saudi, have developed a technology based on the use of carbon dioxide to improve the energy production in solar fields. The usage of this fluid on solar energy has been verified by the research group of UPM at the Almeria Solar Platform (PSA), achieving excellent results: fluid and inexpensive solar fields that are friendly to the environment.
Agriculture has always been a benchmark for production systems in which huge areas are required to obtain economic benefits and trying to reduce harvesting costs. This principle can be applied to the use of solar energy on solar fields for renewable energy production where there are two major competitors: photovoltaic energy and thermal energy. The first competitor cannot currently store large amounts of the energy produced with optimal performance. However, thermal energy allows us to storage energy improving the management of renewable energy, similar to a dam that stores water for a hydroelectric plant.
In the case of solar thermal energy, there are four commercialized technologies with varying costs and energy conversion efficiencies: parabolic trough, power tower, solar dish and linear Fresnel system. The first two types have been developing since the 80s but the other two technologies have been less developed. In fact, the analogous to the three-bladed wind turbines has not been found yet.
Researchers have carried out a study that adopts an innovative prospect for making design decisions: thermal coherence that prevents excessive temperatures or unnecessary material usage. Observing other fields of energy engineering such as nuclear powers plant is required, since numerous plants work with moderate temperatures (300ºC).
Therefore, the solar industry trend of reaching higher temperatures can be unsuitable. Besides, the high production cost can slow down the technological development of the assumed design philosophies. Thus, the disruptive innovation proposed in this study has more potential.
The development of these ideas leads to an improved concept of Fresnel by using carbon dioxide as a fluid working that can be used in severe thermal applications such as the cooling of high-temperature nuclear reactors. In addition, the usage CO2 in solar energy can work to confine this fluid and, at the same time, prevent emissions by replacing other thermoelectric plants that use fossil fuels.
The technology, developed by UPM researchers, is currently being exploited through the Futuro Solar project by signing an agreement between UPM and OHL Industrial. The Futuro Solar project was submitted in the 2nd call for Research and Development Projects co-financed by the European Economic Area Financial Mechanism (EEA-Grants). This technology is an advanced prototype of the learning curve regarding the current state of thermosolar technology. It is expected to start operating in spring 2016.
Suggested Items
Orbex Secures £16.7m Investment for Rocket ‘Ramp Up’ Period
04/24/2024 | OrbexThe UK spaceflight company Orbex has received £16.7m from six backers in an update to its Series C funding round.
Real Time with... IPC APEX EXPO 2024: Going Vertical: SCHMID's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show. He delves into vertical no-touch handling systems and the prospect of achieving sub-10-micron lines. Inspired by SCHMID's technology, Bob expresses excitement about where the industry is today.
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.
Adura Solutions Exhibits at Del Mar 2024
04/24/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year’s Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.