-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Accelerating the PCB Design Cycle
November 4, 2015 | Scott Miller, FreedomCAD ServicesEstimated reading time: 2 minutes
Mylar. Black tape. X-acto knives. Drafting tables. Ring lights.
These were the tools of the trade for the pioneers of printed circuit board design. Manually creating the large artwork that would then be photo-reduced to make the filmwork to image double-sided boards was truly an art form. The best designers were both neat and efficient. Somehow they avoided going home at night with their shirts or skirts covered with bits of tape stuck to them.
For those of you experienced designers, it’s incredible to see how far the art of PCB design has come over these 40+ years of evolution. CAD software has replaced Mylar, and computer screens have replaced lighted drafting tables. And now, it’s more science than art. PCB design now requires puzzle-solving skills on many levels to handle ever-increasing density and speed challenges.
The Need for Speed
By the mid-’90s, technologists were predicting that the use of conductive copper interconnections would need to be replaced with optics in order to address the increasing signal speeds. Year after year, the industry has found ways to increase the capabilities of copper interconnect to meet the escalating challenges. Some of these solutions were materials’ improvements such as high-speed laminates, smooth copper foil, and high-speed connectors. But many were based on PCB design strategies, including the use of back-drilling, reference planes, differential pairs, length matching, hole, pad and anti-pad shapes and sizes. Engineers and designers use many other strategies to maximize performance while minimizing cost.
One thing is clear: Designing printed circuit boards today is much more complicated and challenging than ever. Designing today’s leading-edge circuit boards requires that the designer:
- Has a strong knowledge of the capabilities of the CAD software.
- Understands PCB fabrication processes.
- Has a general knowledge of electronics and component functionality.
- Has a general knowledge of signal and power integrity.
- Understands PCB assembly processes.
- Understands industry specs.
In addition to all of these challenges, designers have to be efficient three-dimensional puzzles solvers because time-to-market is still a vitally important objective. After all, time is money.
So how do today’s designers balance the technical and timing demands? There isn’t one answer. It requires efficient use of the CAD tools, floor planning and effective communication with all parties involved.
Fortunately, Cadence Design Systems, Mentor Graphics, Altium and other PCB CAD software developers continue to make great strides at improving the capabilities of PCB layout tools. This has made it much faster to route differential pairs, create shapes or replicate circuits. And while they strive to make user interfaces logical and easy to use, many capabilities aren’t as obvious.
To read this entire article, which appeared in the October 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.