-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Insulectro Hosts Silicon Valley Designers Council Meeting
October 21, 2015 | Barry Matties, I-Connect007Estimated reading time: 1 minute
On October 15, about 25 people gathered for the IPC Designers Council Silicon Valley Chapter meeting at Insulectro's facility in Mountain View, California. The 1.5-hour meeting opened with a warm welcome from Chapter President Bob McCreight, CID, a PCBA designer at Tesla Motors, and Jason Marsh, VP of product management at Insulectro.
The meeting focused on solder joints, and how circuit design can contribute to the success or failure of a solder joint.
Carl Schattke, senior PCB design engineer at Tesla, was the main speaker. Carl's presentation covered a variety of facets of PCB design, from shadowing to the location of component based on weight and surface finishes. The presentation was filled with great images that supported Schattke’s thoughtful coverage of these topics.
The room was filled primarily with well-seasoned circuit designers, a couple of suppliers, and a few people from Shenmao Technology Group, who provided some of the PowerPoint images for Schatte’s presentation.
About the IPC Designers Council
The IPC Designer's council was formed in 1991 to provide continuing education of the PCB designer. There is no cost to join the Designers Council. While regular IPC membership is reserved for companies, the Designers Council is a separate professional society for individuals, with its own separate benefits. These include discounts on design-related events and IPC standards, as well as the chance for designers to advance their technical education and network with other PCB designers and technologists at local chapter meetings.
Local chapters host roundtable discussions, facility tours, and “lunch & learn” presentations on critical design and manufacturing issues. Chapters also form study groups to help members study for the CID (Certified Interconnect Designer-Basic) and CID+ advanced exams.
There are Designers Council chapters around the world, but there might not be a local DC chapter near you. Don’t despair. If you have at least 12 designers who can meet at least four times a year, why not start your own chapter?
If you would like to learn more about the IPC Designers Council, or even start your own local chapter, send an e-mail to design@ipc.org, or visit http://dc.ipc.org.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.