Reliability and Harmonization of Global Standards at Forefront of EIPC Efforts


Reading time ( words)

At IPC APEX EXPO 2015, I caught up with EIPC’s Michael Weinhold and Alun Morgan for a discussion on both recent and ongoing focuses for EIPC, and the importance of the alignment of global standardization processes, especially for Asia.

Pete Starkey: I'm here with two gentlemen from the European Institute of Printed Circuits Technical Director Michael Weinhold, and Chairman Alun Morgan.

Alun, can you get us started by describing the successes of recent times since you joined EIPC? You had a conference recently. What was the outcome of the conference?

Alun Morgan: Yes, we had a very successful conference in Munich at the beginning of February. In fact, that marks the fifth event that we've had this year, so we've carried out four workshops and one conference in the space of the first, say, five weeks of the year. That’s pretty encouraging. The conference was in Munich. We attracted nearly 90 delegates from 11 different countries to attend. We usually find the conferences work very well when we have a good agenda, which means we have good technical presentations. We have an accessible venue, which Munich certainly was. And third we have a good attraction. We were able to organize a visit to the Eurofighter production line in Manching, courtesy of Airbus Defence and Space, which I was very pleased they agreed to. I think those three things came together and gave us a very exciting conference.alun_morgan_interview.png

Highlights include a session on reliability, which was very well reviewed and commented upon, and we will certainly run a road show of workshops on reliability. So we'll bring together some of the key speakers from the events and we'll run those out into the next few months where we hope to attract a lot of interest.

The other item we covered in some detail was signal integrity, which is becoming more and more important in many applications. We had a very nice overview of that, including an aspect from a chemical supplier, who has proposed a new treatment for the oxide side of copper. We know very well what the profile of copper does to signal integrity. Then we got another view that we haven't really had in the last couple of years that really made it nice and rounded. So now we have a very nice view from the people like Polar Instruments, who provide the test equipment, from the board shops, the fabricators, from chemistry supplies and for laminate suppliers.

All in all, a great package that we can also road show as a training workshop. So I think we'll certainly roll that out in the next few months. We're looking forward now to SMT in May which will be in Nuremberg, where again I've been invited to deliver a keynote speech in the PCB forum. And then our next conference in June will be in Berlin.

Starkey: May I ask you what will be the topic of your keynote speech?

Share




Suggested Items

Catching up with John Johnson, New Director of Business Development at ASC

09/28/2022 | Dan Beaulieu, D.B. Management Group
It’s always good to catch up with old friends, especially when you can start working together. This is the case with my friend John Johnson, who has joined American Standard Circuits. I caught up with John to see what he has planned for ASC, where he will, in part, be using the Averatek A-SAP process that he was previously involved with. John shares some of his background, and talks about the best ways to use this semi-additive process PCB fabrication process that opens the capability window for forming trace and space. This process enables ultra-fine lines.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.



Copyright © 2022 I-Connect007. All rights reserved.