Cirexx Introduces Eclisp, An Alternative to Co-fired Ceramics


Reading time ( words)

Al Wasserzug, SR Business Development Exec at Cirexx talks about their new product, Eclisp. Developed in conjunction with Lockheed Martin, Eclisp is an alternative to co-fired ceramics and used to evacuate heat very efficiently with a low CTE. Wasserzug gave a paper on the new technology at IPC APEX EXPO.

Watch this video

Share




Suggested Items

Ventec Thermal Management Book Excerpt: Chapter 1

09/05/2022 | Didier Mauve and Robert Art, Ventec
Regarding basic principles of thermal dissipation there are three ways of dissipating energy: Conduction, convection, and radiation. The integrated metal substrate (IMS) printed circuit boards rely predominantly on heat conduction all the way through the different layers of the substrates from a hot point (the base of the component) to a cold point (the furthest surface of the metal base) and, usually, thereafter, through a dissipator.

RealTime with... American Standard Circuits: Thermal Management

12/16/2021 | Pete Starkey, I-Connect007
In the third of a series of three RealTime with... interviews, I-Connect007 managing editor Nolan Johnson received knowledgeable and informative answers from Anaya Vardya, John Bushie, and Dave Lackey of American Standard Circuits to his questions on the topic of thermal management. Anaya Vardya began by clarifying the terminology, describing thermal conductivity as a material property defining how quickly heat was transmitted through a piece of that material, whereas thermal management was about analysing the entire system, trying to understand how much heat was being generated, and using appropriate techniques to dissipate that heat as efficiently as possible.

Chapter 1 Excerpt from the Book ‘Thermal Management: A Fabricator's Perspective’

12/08/2020 | Anaya Vardya, American Standard Circuits
Heat cannot be efficiently exchanged with stagnant air surrounding a hot device; however, it can be transferred away from the electronic component to the PCB using thermal vias. A thermal via is a good conductor of heat that runs between the top layer and bottom layer of the PCB, dissipating heat through simple conduction. In simple terms, thermal vias are plated holes located under, or electrically connected to, a surface-mounted heat source on a PCB that allows heat transfer through the hole.



Copyright © 2022 I-Connect007. All rights reserved.