-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
EIPC Summer Conference 2016, Day 2: Strategies to Maintain Profitability in the European PCB Industry
June 21, 2016 | Pete Starkey, I-Connect007Estimated reading time: 23 minutes
Nichols went on to discuss possible causes of de-wetting on the second side after successful first-side reflow: residues on the copper surface, contamination of the tin surface or evaporation of volatiles from solder mask during the first reflow. In his experience, solder masks were often not completely cured free from volatiles on as-received PCBs, and he strongly recommended precautionary UV bumping to give additional reliability.
A novel electroless nickel / immersion palladium / immersion gold universal finish for PCBs was described by Professor Karl Ryder from University of Leicester, a leading expert on applications of deep eutectic solvents in metal finishing. He explained that deep eutectic solvents were a class of ionic liquid in which organic cations combined with halide anions and complexing agents to yield a purely ionic material with remarkable solvent properties. The specific example used in the university’s research work was known as Ethaline 200, composed of ethylene glycol and choline chloride in 2:1 molar ratio, and this was relatively inexpensive and environmentally benign. To demonstrate the unusual solvation properties of deep eutectic solvents with metal ions, he showed a series of solutions of copper 2 salts, which would be blue in aqueous solution, covering a full rainbow spectrum of colours.
The benefits of deep eutectic solvents had been demonstrated in metal finishing applications such as electropolishing, electroplating and immersion plating, as well as in metal recycling and energy storage, and as fluxes that enabled soldering direct to difficult-to-wet surfaces such as electroless nickel. And a previous EU 7th Framework project called IONMET had demonstrated that silver could be successfully deposited on copper as a solderable finish for PCBs. A current project, MACFEST, co-funded by Innovate UK, aimed at producing a high-reliability solderable and wire-bondable universal PCB finish, with good planarity and long shelf life. Deep eutectic solvent technology was being employed to improve functionality and to reduce safety and environment concerns. The first 15 months of the 24-month project had been completed. Immersion palladium had been deposited onto a proprietary electroless nickel base layer from Ethaline at 80°C to a thickness of 70–100 nanometres in 30 minutes. The palladium deposit had been over-plated with gold from a second Ethaline-based formulation, with the gold present as chloride or thiosulphate, at 50°C for 9–15 minutes. Bright uniform deposits had consistently been achieved from chemistry free from acid and cyanide. This ENIPIG (electroless nickel, immersion palladium, immersion gold) finish had shown excellent solderability, with no evidence of the black pad or mud-cracking effects which could occur on the nickel surface when traditional aqueous chemistries were used for gold deposition.
Alex Stepinski is well-known for planning and engineering the first captive PCB manufacturing facility in North America in many years, at Whelen Engineering in Charlestown, New Hampshire. Their fabrication process is characterised by a high level of automation and the innovative re-thinking of many of its fundamental operating principles. His presentation focused on the reduction of chemical system costs, where fresh chemicals represented only about 40% of the total cost associated with a new chemical process. This percentage could be even less if equipment was used that had not been optimised for the process. Typical breakdown of the remaining 60% in the North American market was: regulatory costs and permits 15%, wastewater treatment costs 15%, drag-out losses, 10%, chemical maintenance costs 10%, energy costs 5%, and fume losses 5%. So where did he achieve savings?
Starting with emissions management: “Fumes are good chemistry being wasted in the process of generating system under-pressure to prevent ambient exposure of personnel and equipment to toxic chemicals.” Stepinski discussed various techniques both for minimising fume generation and for recovering chemistry, water and solvents from fume extraction systems. The ultimate solution was to totally mitigate emissions with a hermetically sealed system, which could give very rapid return on investment in the case of high total-dissolved-solids chemistries.
Turning to dragout management: “Chemical drag-out is good working chemistry being wasted by mixing it with water needed to rinse the panels for the subsequent process step”. He discussed drag-out minimization and recovery techniques and demonstrated that approximately 50% of dragout could be recovered simply by using concentrate rinses for make-up of the process bath. This could be increased to 80% if off-line thermal and membrane systems were used at the point source.
Finally, Stepinski considered developments in central wastewater technology: “Central wastewater treatment should only be used for purification of trace contaminants, and for the treatment of spent chemical concentrates. 90% of drag-out should never reach this process.” Traditional systems separated regulated contaminants from wastewater and discharged the decontaminated wastewater, with metal hydroxide waste as a by-product. Modern systems took the process a step further and deionised the wastewater for re-use. A hybrid reverse osmosis / high capacity ion exchange system was the most cost-effective solution currently available. Furthermore, thermal distillation of concentrate waste could result in a zero liquid discharge.
Page 3 of 5
Suggested Items
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.